Issue Credentials Guide

		App Wallet
		on same device	on different device
Issue Credentials
» via QR		-	steps
» via Browser		steps	-
Present Credentials
» remote	to eIDAS2 RP	steps	steps
	to IDA RP	steps	steps
» proximity		-	steps
Sign Documents
» Wallet-Centric	ad-hoc certificate	steps	steps
	pre-loaded certificate	steps	steps
» RP-Centric		steps	steps

Issue Credentials to App Wallet

Issue Credentials to Wallet via QR Code

• Requirements:
  • The Valera Wallet App is installed
• Browser on a second device / PC
  • Open https://wallet.a-sit.at/m6/
  • Click on “Login”
  • Option A - Basic username / password
    • Enter Username “user” and Password “password”
    • Click “Sign in”
  • Option B1 - IDA with a IDA Testidentity with username/password only (no second factor)
    • Requirements: IDA Testidentity without second factor
    • Click “ID Austria” (usually without representation unless a Power of Representation Credential is involved)
    • Enter the username / password of the IDA Testidentity
      • e.g. taken from https://www.id-austria.gv.at/de/developer/testen/vordefinierte-testidentit%C3%A4ten
  • Option B2 - IDA with linked Digitales Amt App (as second factor)
    • Requirements:
      • Digitales Amt App is installed and linked
        • see: Optional: Linking the Digitales Amt App for a Test User
    • Click “ID Austria” (usually without representation unless a Power of Representation Credential is involved)
    • Enter the username / password of the IDA Testidentity
    • The Digitales Amt App opens on the phone
    • Perform IDA login using username/password and optionally Digitales Amt as a second factor for the desired test identity
  • You should see a QR Cdoe
• Wallet App on the phone:
  • Open the Wallet App
  • Under “Data” / “Daten” click on “Load Data” / “Daten laden” or “+” (bottom right, Floating Action Button)
  • Select “Load via QR-Code” / “Mit QR-Code beziehen”
  • Scan the QR code shown in the web browser
  • Select the desired credential: e.g., PID as SD-JWT
    • Choose the required data within it: “All Data”
    • Click “Load Data” / “Daten laden”
  • The selected credential should now be loaded/stored with only the test identity’s data

Issue Credential to Wallet via Web Browser (and IDA)

• Requirements:
  • The Valera Wallet App is installed
• Wallet App on the phone:
  • Open the Wallet App
  • Under “My Data” / “Meine Daten” click on “Load Data” / “Daten laden” or “+” (bottom right, Floating Action Button)
  • Select “Load via Browser” / “Über Browser beziehen”
  • Select the issuing service, which should already be pre-filled
    • Click “Load Data”
  • Select the desired credential: e.g., PID as SD-JWT
    • Choose the required data within it: “All Data”
    • Click “Load Data” / “Daten laden”
• Browser on the phone:
  • The browser opens
  • Option A - Basic username / password
    • Enter Username “user” and Password “password”
    • Click “Sign in”
  • Option B1 - IDA with a IDA Testidentity with username/password only (no second factor)
    • Requirements: Digitales Amt App is NOT installed on the phone (otherwise this app will open upon login)
    • Click “IDA Login” (normally without representation unless a Power of Representation Credential is involved)
    • Enter the username / password of the IDA Testidentity
      • e.g. taken from https://www.id-austria.gv.at/de/developer/testen/vordefinierte-testidentit%C3%A4ten
  • Option B2 - IDA with linked Digitales Amt App (as second factor)
    • Requirements:
      • Digitales Amt App is installed and linked
        • see: Optional: Linking the Digitales Amt App for a Test User
    • Click “IDA Login” (normally without representation unless a Power of Representation Credential is involved)
    • Enter the username / password of the IDA Testidentity
    • The Digitales Amt App opens
    • Perform IDA login using username/password and optionally Digitales Amt as a second factor for the desired test identity
• Wallet App on the phone:
  • Wallet App opens
  • The selected credential should now be loaded/stored with only the test identity’s data

Optional: Linking the Digitales Amt App for a Test User

• Requirement: The Digitales Amt App is installed
• Browser on PC:
  • Navigate to the A-Trust Test Identity Manager: https://www.a-trust.at/TestIdentitaetenManagement/Login/Default.aspx
  • Log in with real-world personal ID Austria: “ID Austria login”
  • Either: “Add a new test identity” / “Neue Testidentität hinzufügen”
    • System: “E-ID Test System”
    • Select the desired test identity
    • Choose the number of factors required to activate the test certificate:
      • Choose whether login should only require a signature password
      • Or if an additional Digitales Amt App should be bound as a second factor (see “Or: Edit existing test identity”)
    • Define signature password
  • Or: Click “Edit” / “Bearbeiten” on an existing test identity
    • “Link another device” / “Weiteres Gerät verknüpfen”
    • A QR code will be displayed
• Digitales Amt on the phone:
  • “Log in” / “Anmelden”
  • Scan QR code
  • Present biometric authentication multiple times
  • Enter signature password
  • The Digitales Amt App should now be registered as a second factor for the IDA login of the selected test identity